PCBが含まれているものは何ですか?
PCBが使用された代表的な電気機器には、トランス(変圧器)やコンデンサー、照明器具の安定器があります。 PCBが含まれているトランスやコンデンサーは、古い工場やビルなどで使用されており、安定器は古い工場やビルの蛍光灯などに使用されていました。 なお、一般家庭の蛍光灯にPCBが使用されたものはありません。
PCBは危険ですか?
PCBは脂肪に溶けやすい性質を持つことから、食物連鎖などで生物の体内に徐々に蓄積しやすく、人体に入るとさまざまな症状を引き起こします。 中毒症状としては、目やに、爪や口腔粘膜の色素沈着などから始まり、ついで座瘡様皮疹(ざそうようひしん)(塩素ニキビ)、爪の変形、まぶたや関節の腫れなどが報告されています。
PCB なぜだめ?
PCBの特徴として、水に溶けにくく、沸点が高い、熱で分解しにくい、不燃性、電気絶縁性が高いなど、化学的にも安定な性質を有することから、電気機器の絶縁油、熱交換器の熱媒体、ノンカーボン紙など様々な用途で利用されていましたが、現在は製造・輸入ともに禁止されています。
キャッシュ
PCB廃棄物とPCB汚染物の違いは何ですか?
PCB廃棄物は、含有又は付着したPCB濃度により「高濃度PCB廃棄物」と「低濃度PCB廃棄物」に分類されます。 ※なお、橋梁等の塗膜、感圧複写紙、汚泥をはじめとする可燃性のPCB汚染物については、PCB濃度が100,000ppm以下であれば低濃度PCB廃棄物となります。
PCB いつまで使われていた?
製造後30年以上経過した古い電気機器には、PCBが基準の0.5mg/kg(=ppm)を超えた濃度で汚染されているものがあります。 低濃度PCB廃棄物の処分期間は、PCB特措法において令和9年(2027年)3月31日で終了します。
高濃度PCB どんなもの?
PCB廃棄物は、PCB濃度等により、高濃度PCB廃棄物と低濃度PCB廃棄物に分類されます。 高濃度PCB廃棄物はPCB濃度が0.5%(=5000ppm)を超えるものとなります。 高圧トランス・コンデンサ、 蛍光灯安定器、水銀灯等の高濃度PCBは中間貯蔵・環境安全事業株式会社(JESCO社)で処理を行っています。
PCB 触ったらどうなる?
PCBの毒性 ・ 一般にPCB の中毒症状としては、爪や口腔粘膜の色素沈着、塩素座瘡(塩素ニキビ)、爪の変形、関節のはれ、肝機能障害などがあります。 ・ PCB 自体の急性毒性は衣類の防虫剤程度と言われ、直接飲んだり触れたりしない限り、近くにあるだけで直ちに影響があるというものではありません。
PCB汚染の症状は?
一般にPCBによる中毒症状として、目やに、爪や口腔粘膜の色素沈着などから始まり、ついで、座瘡様皮疹(塩素ニキビ)、爪の変形、まぶたや関節のはれなどが報告されています。
PCBを分解するにはどうすればいいですか?
PCB汚染物(固形状PCB廃棄物)を分解する処理方式としては、水熱酸化分解、還元熱化学分解、機械化学分解、溶融分解があります。
PCB廃棄物の見分け方は?
PCBを含有する安定器は、安定器に貼り付けられた銘板を確認することで判別できます。 銘板の情報を基に、各メーカーに問い合わせるか、(一社)日本照明工業会のホームページ(外部サイト)を参照して判別してください。
PCB いつまでに処分?
低濃度PCB廃棄物の処分期間は、PCB特措法において令和9年(2027年)3月31日で終了します。 それまでに施設内の電気設備を総点検し、該当する電気機器がないか確認してください。
PCBの代替品は何ですか?
PCBの代替品で最も使用されているものは、パラフィンなどの鉱物油です。 しかし、鉱物油を使うということは、PCBが開発される以前の時代に戻る、ということを意味します。 そもそも、なぜ鉱物油の絶縁液がPCBにとって変わられたかといえば、PCBの方が燃えにくい、という性質があったからです。
蛍光灯のPCBとは何ですか?
PCB(Polychlorinated Biphenyl)〈ポリ塩化ビフェニル〉
当社製安定器に使用されていたものは、五塩化ビフェニルと呼ばれるものです。 PCBは、化学的に不活性で難燃性であり、絶縁性が高く電気的特性に優れることから、熱媒体・印刷インク・感熱紙・絶縁油・コンデンサー油などに使用されていました。
PCBの代替物質は何ですか?
PCBの代替品で最も使用されているものは、パラフィンなどの鉱物油です。 しかし、鉱物油を使うということは、PCBが開発される以前の時代に戻る、ということを意味します。 そもそも、なぜ鉱物油の絶縁液がPCBにとって変わられたかといえば、PCBの方が燃えにくい、という性質があったからです。
PCB 使用禁止 いつから?
しかし、1968 年(昭和 43 年)に発生したカネミ油症事件を機に PCB の毒性が大きな社会問題となり、1973 年(昭和 48 年)に制定された「化学物質の審査及び製造等の規制に関する法律(翌年施行)」により製造・輸入・使用が原則として禁 止されました。
PCBの原因は?
○PCB(コプラナーPCB)の発生源
ダイオキシン類の主な発生源は、ごみ焼却などの燃焼によって発生することが一般に知られていますが、その他製鋼用電気炉、たばこの煙、自動車の排気ガスなど様々な発生源があり、いずれも意図的に製造したのではなく、非意図的に生成されたといえます。
PCB中毒の症状は?
一般にPCBによる中毒症状として、目やに、爪や口腔粘膜の色素沈着などから始まり、ついで、座瘡様皮疹(塩素ニキビ)、爪の変形、まぶたや関節のはれなどが報告されています。
PCBの探し方は?
PCBを含有する安定器は、安定器に貼り付けられた銘板を確認することで判別できます。 銘板の情報を基に、各メーカーに問い合わせるか、(一社)日本照明工業会のホームページ(外部サイト)を参照して判別してください。
蛍光灯のPCB処分費用はいくらですか?
蛍光灯安定器を多数保管している事業者様へ
しかし、高濃度PCB廃棄物として取り扱われる「安定器」につきましては環境省が所管するJESCOによる処理が義務付けられており、処理費用は一律30,240円/kg(平成26年4月1日現在)と定められています。
PCBは誰が処分するか?
PCBを含む変圧器等はPCB廃棄物(特別管理産業廃棄物)に該当し、建物所有者の処理責任となりますので、工事業者は工事完了後に建物所有者にPCB廃棄物を引き渡してください。 PCB廃棄物は、工事業者(元請業者等)の廃棄物ではありません。